Activating VCarve Pro Makerspace Client Edition

From Fat Cat Fab Lab
Revision as of 03:27, 11 January 2022 by KerrickStaley (talk | contribs) (Migrate page from CiviCRM)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Follow the following steps to activate Vcarve Pro Makerspace Client Edition:

  1. Download and install Vcare pro trial addition from HERE.
  2. Copy the Vcarve Pro markerspace serial number from HERE.
  3. Enter Makerspace ID into VCarve Pro Trial Edition. See below or LINK.
    1. Click "About VCarve Pro Trial Edition" in the "Help" drop-down.
    2. Click the "Enter Makerspace ID" under "Licensed to:"
    3. Paste makerspace serial number and click "OK"
    4. Restart VCarve Pro and check for "Makerspace Client" in the title.
Retrieved from "https://wiki.fatcatfablab.org/w/index.php?title=Activating_VCarve_Pro_Makerspace_Client_Edition&oldid=187"