749
edits
No edit summary |
No edit summary |
||
(7 intermediate revisions by the same user not shown) | |||
Line 14:
|-
! Make !! Name !! Model !! Filament Size [mm] !! Nozzle Size [mm] !! Extruder(s) / Drive !! Build Volume !! Slicer !! Notes
|-
! scope="row" | Flashforge
Line 34 ⟶ 28:
|-
! scope="row" | Raise3D
|
|| 305 × 305 × 605 mm
12 × 12 × 23.8 in
| [https://www.ideamaker.io/download.html IdeaMaker] ||
|-
! rowspan="2" | SeeMeCNC
Line 44 ⟶ 38:
6.9 (Dia) × 7.8 in
| [https://ultimaker.com/software/ultimaker-cura Ultimaker Cura] || Delta printer. No heated bed.
''Not operational; needs thermistor replacement''<br/>
|-
| Saxon || [https://www.seemecnc.com/products/rostock-max-complete-kit Rostock MAX V2] || 1.75 || style="color:red;" | '''0.5''' || Single<br/>Bowden
Line 50 ⟶ 44:
11 (Dia) × 14.75 in
| [https://ultimaker.com/software/ultimaker-cura Ultimaker Cura] / [https://www.seemecnc.com/pages/downloads MatterControl v1.6.1] || Delta printer. Tempermental. Part cooling fan may need attention.
|-
! rowspan="6" | Ultimaker
Line 88 ⟶ 81:
== Materials Policy ==
Members are encouraged to bring their own filaments for printing and store them in their bins when done. Below and above the main 3D printing table are various spools of 1.75mm and 2.85mm filament donated by others which are free to use. Any member who leave their spools out, by default, consents other members to use them at will.
When all donated filament is gone, that's the end of it, and you must purchase your own.
== Build Plate Preparation ==
Line 99 ⟶ 94:
{{Note|Please return printers back to 0.4mm after use or leave a note of what size nozzle is installed -- nozzle size indicators are on the printers for this purpose.|warn}}
{{Note|Do NOT attempt to remove nozzles from Ultimaker 3 print cores!|warn}}
Ultimaker 2+ printers equipped with Olsson blocks can have their nozzles easily changed. Default for all applicable printers is 0.4mm (excludes Z-Unlimited).
The hot end must be fully heated and material removed prior to changing a nozzle, otherwise damange to the hotend and printhead will occur. The following directions must be followed for nozzle changing.
Line 219 ⟶ 215:
The Ultimaker 3 printer uses print cores. We have 0.4mm AA and BB cores. The nozzles on the cores cannot be changed.
The AA print cores can be used for printing: PLA, PLA+, PETG, ABS, CPE, CPE+, Nylon, PC, TPU 95A, PP, and Breakaway
The BB print core can be used for printing: PVA (a water-soluble support material).
See Print Core Compatibility below for more information.
=== Print Core Compatibility ===
Material compatibility depends on print core type and nozzle size.
{{Note|PVA
Items marked with 'Exp' are experimental (some tweaking may be needed and your results are not guaranteed).
|