3D Printing: Difference between revisions
Content added Content deleted
| Line 189: | Line 189: | ||
* Nozzle Size = 0.8mm (or whatever is installed) |
* Nozzle Size = 0.8mm (or whatever is installed) |
||
* Compatible Material Diameter = 2.85mm |
* Compatible Material Diameter = 2.85mm |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
=== Important Information === |
=== Important Information === |
||
| Line 198: | Line 203: | ||
=== Slicing Information === |
=== Slicing Information === |
||
* Try to keep the print hollow with 0% infill for really tall parts. But if you need to add infill, you usually don’t need more than 10% infill since the nozzle is a much bigger size |
* Try to keep the print hollow with 0% infill for really tall parts. But if you need to add infill, you usually don’t need more than 10% infill since the nozzle is a much bigger size |
||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
| ⚫ | |||
=== Preparing for a Print on Z-Unlimited === |
=== Preparing for a Print on Z-Unlimited === |
||