3D Printing: Difference between revisions
Content added Content deleted
No edit summary |
|||
| Line 108: | Line 108: | ||
Certain high temp materials will stick strongly to glass and can crack it. For those, it's better to remove the prints before the glass cools fully to prevent this (ex: PC). |
Certain high temp materials will stick strongly to glass and can crack it. For those, it's better to remove the prints before the glass cools fully to prevent this (ex: PC). |
||
== Changing Nozzles on Ultimaker Printers == |
== Changing Nozzles on Ultimaker 2/2+ Printers == |
||
Ultimaker printers equipped with Olsson blocks can have their nozzles easily changed. Default for all applicable printers is 0.4mm (excludes Z-Unlimited). Please return printers back to 0.4mm after use or leave a note of what size nozzle is installed -- nozzle size indicators are on the printers for this purpose. |
Ultimaker printers equipped with Olsson blocks can have their nozzles easily changed. Default for all applicable printers is 0.4mm (excludes Z-Unlimited). Please return printers back to 0.4mm after use or leave a note of what size nozzle is installed -- nozzle size indicators are on the printers for this purpose. |
||
| Line 135: | Line 135: | ||
* 0.6mm - 2 dimples. |
* 0.6mm - 2 dimples. |
||
* 0.8mm - 3 dimples. |
* 0.8mm - 3 dimples. |
||
=== Olsson Nozzle Torque Wrench === |
|||
Files for the torque wrench can be found here: https://www.youmagine.com/designs/nozzle-torque-wrench |
|||
* Required items: 7mm socket with 1/4" square hole. |
|||
* Material: CPE, PETG. |
|||
* Print settings: 0.15 or 0.20mm layer height; Solid, all walls; No supports. |
|||
== Bed Leveling == |
== Bed Leveling == |
||