CNC Router: Difference between revisions
Content deleted Content added
No edit summary |
|||
Line 101:
Blue = (only for Z) top-down perspective. Zero at limit switch.
== Zeroing Procedure == ▼
IMPORTANT NOTE: Must set Z zero at bottom of work if using multiple tools. You can set Z zero at top of work if just engraving with one tool.▼
1. Check the bed is clear of debris or obstruction▼
2. Click “Initialize”. This will home the Z, and X-Y axes▼
3. Insert tool #1.▼
4. Remove dust collector boot from spindle.▼
5. Click “Measure tool” (at corner of screen). ▼
6. Connect touch plate and Click “Touch Top”.▼
7. Click “Laser on” (it’s not perfect rn, needs alignment).▼
8. Click “Laser X0 Y0”.▼
== Creating The Cut Files ==
Line 158 ⟶ 138:
* Step 2: 10k RPM for 5 mins
* Step 3: 18k RPM for 5 mins
▲== Zeroing Procedure ==
▲IMPORTANT NOTE: Must set Z zero at bottom of work if using multiple tools. You can set Z zero at top of work if just engraving with one tool.
▲1. Check the bed is clear of debris or obstruction
▲2. Click “Initialize”. This will home the Z, and X-Y axes
▲3. Insert tool #1.
▲4. Remove dust collector boot from spindle.
▲5. Click “Measure tool” (at corner of screen).
▲6. Connect touch plate and Click “Touch Top”.
▲7. Click “Laser on” (it’s not perfect rn, needs alignment).
▲8. Click “Laser X0 Y0”.
=== Calibration ===
| |||