CNC Router: Difference between revisions
Content deleted Content added
Line 274:
:* Use printer paper under the bit and move it back and forth
::* Lowering the Z until the bit just barely snags the paper. There should be room enough for the paper to drag under the bit.
* [https://youtu.be/r9-QHmy459o Click the 'Calibrate Switch' button]. The Z lower bound is now one paper width above the spoil board (~0.004" or 0.1mm). We do this to minimize cuts into the spoil board that we prefer to resurface as rarely as possible.
:* The command log will first asks you to jog the bit to the bed, which is already completed
:* This step will start the process to reset the Z bottom at the current position of the bottom of the bit
|