749
edits
CNC Router: Difference between revisions
→Replacing 3D Printed Dust Collection Boot
Line 324:
This part can be printed as one piece or as two separate pieces.
* Full STL file requires a large printer
** [https://drive.google.com/file/d/13Dxwsi6C2WWSWrQ5LSA_VqfQnIbXf5Xv/view?usp=sharing CNC Dust Boot Full.stl]
* Separate STL files can be done on any Ultimaker or similar printer.
**
**
Print settings:
Line 341:
Hardware:
* [3x] - 1/4" x 1/2" cylinder neodymium magnets
Assembly:
# Super glue the two halves together
# Press in the magnets. The magnets should be about flush and in the same plane as the top surface of the boot.
# Glue the magnets in place.
# Install the brushes. No glue is needed.
== Troubleshooting ==
| |||