749
edits
Line 178:
* Must use sacrificial board underneath stock if cutting through stock completely.
* Must set Z zero at bottom of work if using multiple tools. You can set Z zero at top of work if just engraving with one tool or any case where the top stock reference is preserved.
* Type G92 to clear any stored settings.▼
Line 201 ⟶ 202:
* For ‘Z0 at top’ jobs, plug in touch plate, position under tool and Press “Touch Top” button.
* For ‘Z0 at bottom’ jobs, Make sure no local Z is set. T codes in job trigger measure tool. Ensure job rapids clear all clamps.
▲Type G92 to clear any stored settings
=== Securing the Stock ===
|