749
edits
CNC Router: Difference between revisions
→Zeroing Procedure
Line 178:
* Must use sacrificial board underneath stock if cutting through stock completely.
* Must set Z zero at bottom of work if using multiple tools. You can set Z zero at top of work if just engraving with one tool or any case where the top stock reference is preserved.
Line 201 ⟶ 200:
10. Connect touch plate, position touch plate on top of bed surface (or on top of stock depending on your CAM job setup), position tool over touch plate and click “Touch Top”. Keep your hand over the E-stop in case something goes wrong!
* For ‘Z0 at top’ jobs, plug in touch plate, position under tool and Press “Touch Top” button.
* For ‘Z0 at bottom’ jobs, Make sure no local Z is set. T codes in job trigger measure tool. Ensure job rapids clear all clamps. Type G92 to clear any stored settings
=== Securing the Stock ===
| |||