Laser Cutting: Difference between revisions
Content added Content deleted
| Line 319: | Line 319: | ||
=== Laser chamber fills with smoke === |
=== Laser chamber fills with smoke === |
||
* Check that the air filter is working, by manually toggling the air filter power button. On the airfilter console, this button's icon is a circle with a line through it. If it's not running, stop working and notify the #laser Slack channel or the Board. |
* Check that the air filter is working, by manually toggling the air filter power button. On the airfilter console, this button's icon is a circle with a line through it. If it's not running, stop working and notify the #laser Slack channel or the Board. |
||
=== Laser light not visible during focusing === |
|||
* Check to make sure the lens is not installed backwards. The chamfered edges of the black lens housing should be flush with the chamfered edges of the laser head. |
|||
** Unscrew the nozzle cone and make sure it is clean and clear of crusty stuff. |
|||
*** If the 4" lens is installed, make sure to swap the nozzle cone with the large aperture nozzle cone in the red/white box of laser supplies. |
|||
== Maintenance == |
== Maintenance == |
||