|
=== Job Control error "No more room left for jobs" ===
** Make sure your job is smaller than 27" x 17"
** Make sure you're sending your job in the correct orientation.
*=== Laser decides not to cut all, or certain vectors: ===
** Make sure you don't have overlapping cut lines. This can be caused by using the "Paste in Place" function in Illustrator.
** In Illustrator:
*** Check your Document Color Mode (duh).
*** Check the dropdown menu in the color tool palette. Confirm that RGB is selected, and not Grayscale or other.
*** Select your vectors and bring up the color dialog. Edit menu -> Edit Colors -> RGB
*=== Laser chamber fills with smoke. ===
** Check that the air filter is working, by manually toggling the air filter power button. On the airfilter console, this button's icon is a circle with a line through it. If it's not running, stop working and notify the #laser Slack channel or the Board.
== Maintenance ==
|