Rules and Policies

Membership Levels & Benefits

Standard – For hobbyists

$110 per month
24 / 7 Access via RFID Key Card
3hrs job time on Laser & CNC Router
Discounts on some Classes

Commercial – For co-working

$220 per month
24 / 7 Access via RFID Key Card
6hrs job time on Laser & CNC Router
Discounts on some Classes

Student – for students (18+)

$99 per month
24 / 7 Access via RFID Key Card
3hrs job time on Laser & CNC Router
Discounts on some Classes
Must have school email address

Storage Levels & Benefits

Standard Storage

$30 per month
66L (70Qt) bin - 26.1” x 16.25” x 13.5”

Student Storage

$27 per month
66L (70Qt) bin - 26.1” x 16.25” x 13.5”

Double Storage

$60 per month
2 x 66L (70Qt) bin - 26.1” x 16.25” x 13.5” each

Rules and Policies

Note: This is a working document.

Rules and Policies and enforcement set forth at Fat Cat Fab Lab are the sole discretion of the Board. The Board may act as needed to maintain the collective efforts of the lab members at large.

Member Storage

The lab is cannot be used as a storage facility. The below rules are required to be followed by all members or else a strike will be given.

Members must keep all belongings inside their bin when not present at the lab.
Items cannot be left out longer than 1 hour unattended.
If items must be left out longer than 1 hour, member must apply a Project Permit to their item with their name, date, and time to completion (no longer than 72 hours). Projects that exceed this are subject to be moved to pre-trash and can be materials can be used or collected by any member.