File:FCFL CNC Router Clamps.jpg

Original file ‎(4,032 × 2,009 pixels, file size: 1.5 MB, MIME type: image/jpeg)

3D printed CNC router clamps

File history

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	19:57, 11 September 2023		4,032 × 2,009 (1.5 MB)	Macakcat (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone SE (1st generation)
Exposure time	1/20 sec (0.05)
F Number	f/2.2
ISO speed rating	200
Date and time of data generation	23:32, 29 May 2022
Lens focal length	4.15 mm
Latitude	40° 44′ 2.69″ N
Longitude	74° 0′ 11.23″ W
Altitude	8.294 meters above sea level
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	15.4.1
File change date and time	23:32, 29 May 2022
Exposure Program	Normal program
Exif version	2.32
Date and time of digitizing	23:32, 29 May 2022
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.3220146557952
APEX aperture	2.2750070478485
APEX brightness	1.3281390522311
APEX exposure bias	0
Metering mode	Spot
Flash	Flash did not fire, compulsory flash suppression
DateTimeOriginal subseconds	464
DateTimeDigitized subseconds	464
Supported Flashpix version	1
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	29 mm
Scene capture type	Standard
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	True direction
Direction of image	47.611236589497
Reference for bearing of destination	True direction
Bearing of destination	47.611236589497