|
|
Line 1: |
Line 1: |
|
⚫ |
# Always wear non-flammable, protective clothing and shoes suitable for the welding to be done. |
|
= Safety & Usage Agreement = |
|
|
⚫ |
# Know where safety equipment is located. |
|
|
|
|
⚫ |
# Never use a new piece of equipment without instruction. |
⚫ |
Always wear non-flammable, protective clothing and shoes suitable for the welding to be done. |
|
|
⚫ |
# Check equipment condition before use & never attempt to repair without instruction. You may be held liable for damages to equipment, so '''if you are unsure, ask an instructor'''. |
|
|
|
|
⚫ |
# Notify the instructor of any injuries or equipment damage immediately. |
⚫ |
Know where safety equipment is located. |
|
|
⚫ |
# Clear all combustibles from the welding area. |
|
|
|
|
⚫ |
# Check that fume exhaust is on working properly. |
⚫ |
Never use a new piece of equipment without instruction. |
|
|
⚫ |
# When opening the shielding gas tank valves, stand to the side of the gauges (aka the gas flow regulator) and turn the valves slowly. |
|
|
|
|
⚫ |
# Always handle welding material with pliers and proper gloves. |
⚫ |
Check equipment condition before use & never attempt to repair without instruction. You may be held liable for damages to equipment, so '''if you are unsure, ask an instructor'''. |
|
|
⚫ |
# When shutting down or not in use, completely close the shielding gas tank main valve (turn large knob on top of tank clockwise until it stops turning). |
|
|
|
|
⚫ |
# Always turn equipment off, coil cables, hang electrode, stow foot pedal when not actively welding. |
⚫ |
Notify the instructor of any injuries or equipment damage immediately. |
|
|
⚫ |
# Always clean the electrode holder and sharpen tungsten for the next person. |
|
|
|
|
⚫ |
# Always clean the work area when you are done (leave nothing on the work table except the ground clamp). |
⚫ |
Clear all combustibles from the welding area. |
|
|
|
|
⚫ |
Check that fume exhaust is on working properly. |
|
|
|
|
⚫ |
When opening the shielding gas tank valves, stand to the side of the gauges (aka the gas flow regulator) and turn the valves slowly. |
|
|
|
|
⚫ |
Always handle welding material with pliers and proper gloves. |
|
|
|
|
⚫ |
When shutting down or not in use, completely close the shielding gas tank main valve (turn large knob on top of tank clockwise until it stops turning). |
|
|
|
|
⚫ |
Always turn equipment off, coil cables, hang electrode, stow foot pedal when not actively welding. |
|
|
|
|
⚫ |
Always clean the electrode holder and sharpen tungsten for the next person. |
|
|
|
|
⚫ |
Always clean the work area when you are done (leave nothing on the work table except the ground clamp). |
|
|
|
|
|
|
* ☐ I acknowledge that I have read and understood the above |
|
* ☐ I acknowledge that I have read and understood the above |