Safety and Usage Agreement
- Always wear non-flammable, protective clothing and shoes suitable for the welding to be done.
- Know where safety equipment is located.
- Never use a new piece of equipment without instruction.
- Check equipment condition before use & never attempt to repair without instruction. You may be held liable for damages to equipment, so if you are unsure, ask an instructor.
- Notify the instructor of any injuries or equipment damage immediately.
- Clear all combustibles from the welding area.
- Check that fume exhaust is on working properly.
- When opening the shielding gas tank valves, stand to the side of the gauges (aka the gas flow regulator) and turn the valves slowly.
- Always handle welding material with pliers and proper gloves.
- When shutting down or not in use, completely close the shielding gas tank main valve (turn large knob on top of tank clockwise until it stops turning).
- Always turn equipment off, coil cables, hang electrode, stow foot pedal when not actively welding.
- Always clean the electrode holder and sharpen tungsten for the next person.
- Always clean the work area when you are done (leave nothing on the work table except the ground clamp).
- ☐ I acknowledge that I have read and understood the above
- ☐ I will abide by the guidelines stated herein at the risk of forfeiting my equipment privileges.
Signature ___________________________________________ Date ____________________